70mm extended choke.
| STARS/* | ALPHA CODE | IDENTIFICATION | NUMBER OF SLOTS ON CHOKE TUBES | TYPE OF CHOKING | MEASURE IN TENTHS(approx) |
| EXTRA-FULL | EX-FULL | EXTRA-FULL | NO SLOTS | 11-12/10 | |
| * | F | FULL | 1 | 1/1 | 9-10/10 |
| ** | IM | IMPROVED MODIFIED | 2 | 3/4 | 7-8/10 |
| *** | M | MODIFIED | 3 | 1/2 | 4-6/10 |
| **** | IC | IMPROVED CYLINDER | 4 | 1/4 | 3/10 |
| SKEET | SK | SKEET | 5 | SKEET | 2/10 |
| ***** | CL | CYLINDER | NO SLOTS | 0/0 | 1/10 - CL |
We strongly recommend that a choke of no greater constriction than Modified (***) be used when firing steel shots.
For example, using an Improved Modified (**) or Full (*) choke when firing steel shots may cause damage to the barrel and void your warranty.
CWe always recommend that you carefully read the instructions on our “owner’s manual” and ammunition box just for more detailed information.
- Short Description:
- *Prices include tax
16 Reviews
-
Chokes
I finally received the chokes yesterday. when I was installing them last night it was hard to screw them in. I took them out and put more grease on them. When I screwed them back in they were still getting hung up. I hope the threads are not screwed up. Thanks, Scott -------------------- Dear Mr. Grady, We are glad the chokes arrived, but we are concerned to hear that you're experiencing resistance during installation. While it's good that you applied grease, the chokes should ideally thread in smoothly by hand until the very final seating. Since you mentioned they are getting "hung up," we recommend that you do not force them further, as this could potentially damage the threads on the chokes or, more importantly, your barrel. To help us troubleshoot this for you, could you please verify the following: • The Firearm Model: Which shotgun model are you installing these into? • Thread Inspection: If you look at the threads on the new chokes and inside the barrel, do you see any visible debris, burrs, or flattening? Sometimes, a small amount of shipping residue or a slight mismatch in thread pattern can cause this. We want to ensure your equipment stays in perfect condition, so please let us know these details and we will find a solution—whether that’s a technical tip or a replacement. The best way is to reach out to us at info@ifg-usa.com or (800) 450-1852 | (806) 398-0777. Best regards, IFG Customer Support
-
Chokes
I ordered four chokes on January 24 and they still have not arrived. FedEx tracking says they are in Fort Worth, Texas. ------------------------------- Dear Mr. Grady, We apologize for the frustration caused by the delay in receiving your order; we understand how important timely delivery is to our customers. While we strive for a seamless shipping process, FedEx experienced a National Service Disruption between 1/23/2026 and 1/30/2026 due to severe winter storms. Unfortunately, these weather conditions were beyond the control of both IFG and FedEx, leading to backlogs across their network. According to our records, your order was placed on Saturday 1/24/2026, processed on Monday 1/26/2026, and shipped on 1/26/2026 and successfully delivered on Wednesday 2/4/2026. We appreciate your patience as the carriers worked through these extreme weather challenges. If there is anything else we can assist you with regarding the items you received, please let us know. Best regards, IFG Customer Support
-
Perfect fit on F.A.I.R shotgun. Nice finish and easier to remove and install then flush chokes
Extended chokes will protect the bluing on the end of a barrel if you are using a slide-in gun case
-
Excellent choke
fits great and works great
-
XP70 Extended Choke
Fast and Easy Purchase
-
Choke tube
So far, so good. the full choke tube i got when I purchased the gun must be just a fraction "off." It binds when I insert it into the barrel. This new choke fits right in and screws tight.
-
Extended 28 gauge tubes
Nice. Throughs a beautiful, uniform pattern
-
Chokes
Great as they fit my FAIR O/U 410 shotgun
-
Excellent quality
Great customer service. The choke tube performed flawlessly. Well made.
-
XP 70 Chokes
5 came with my new Carrera. I wanted a full set including skeet and Lt Mod as i shoot skeet and sporting clays. I patterned several of the xp70 chokes in the last week and the results are very impressive. Really some of the most balanced chokes on pattern density i have seen. I have done every thing from factory chokes that come with guns to replacement extended from top manufacturers, and these seem to exceed them. Im very impressed
-
XP70 choke tube
I own the Carerra 1 and have been somewhat disappointed with not being able to find or afford aftermarket chokes. After ordering the Technichoke XP70 in cylinder and light modified, there are a couple of things that stand out: 1. Shipping is beyond outstanding, it is exceptional. Order on day X and receiveed them two days later. 2. After patterning these chokes, everything is spot on and if I could afford a Rhino or Briley choke tube, I would bet good money on these Technichoke. I don’t need to shop around anymore. Thank you IFG, excellent service and excellent products.
-
.410 Chokes
I use my .410 for 5 stand and pheasant/grouse hunting. The new extended choke have made my .410 a bird slammer. Thanks Derek